Loading... Please wait...

Sales / Service: 602.437.5231


  • Image 1

Nylon Additive - 8 0z Bottle

Share This:
1.00 LBS
Calculated at checkout

Product Description


The 900 Series Nylon Ink must be mixed with the 900 Catalyst before printing on Nylon. Catalyst is available in 2 ounce, 8 ounce, and 1 gallon containers and must be purchased separately.

The catalyst helps the ink adhere better to hard-to-print fabrics such as nylon.  However, there are also other uses such as adding catalyst to our 3820 Flock Adhesive to promote better adhesion of the flocking fibers.

 Click HERE for Product Data Sheet


The catalyst should be thoroughly mixed in to the ink to the following proportions:

By volume = 16 parts ink to 1 part catalyst
By weight = 20 parts ink to 1 part catalyst

1 ounce of catalyst to 1 pint of ink 
2 ounces of catalyst to 1 quart of ink 
8 ounces of catalyst to 1 gallon of ink

Ink may be used immediately after mixing. Do not mix more ink than is needed for a job. Do not under-catalyze the ink. Pot life of mixed ink is 4 to 8 hours. Over-catalyzation will shorten the pot life.

If printing on cotton, it is not necessary to catalyze the ink. Print it as you would a normal direct print plastisol ink. SDS Refer to SDS prior to use.


There are 0 review(s) for this product

This product hasn't received any reviews yet. Be the first to review this product!

Newsletter Signup

Sign up for exclusive offers and updates

American Screen Supply, LLC. wishes everyone a prosperous 2018!