Metal Heat Transfer Vinyl

Metallic Foil Look with a Super Soft Feel!

Dazzle customers with this precious metal HTV! Available in silver and gold, Metalfeatures show stopping shine with a smooth finish and soft hand that can be washed and worn without becoming lackluster. This fashion forward material is ideal for bridal parties, spirit wear, and any occasion that needs a touch of gleaming chrome! Due to Metal’s pressure sensitive carrier, you can use the Heat Press Weeding Trick (heating the platen and weeding the design on the heated surface) for smooth weeding!

Metal is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.

 
 
 
 

Specifications: PET Composition • Pressure sensitive backing • brushed metal finish • 100 Microns/3.9 Mils • 45°/60° blade • Can not be layered

 
 

Cricut:

Blade: Standard
Setting: Iron-on

Silhouette Cameo:

Blade: Standard, 2
Material: Heat Transfer, Smooth
Speed: 8
Force: 6

Scan N Cut:

Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 3

Roland GS/GX-24:

Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 30-50 cm/s

Graphtec:

Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier cold

Metal Applies to:

100% cotton
Poly/cotton blends
100% polyester

Recommended Accessories:

Siser Weeder
Multipurpose Paper or
Kraft Paper or
Heat Transfer Cover Sheet

Laundering:

Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Hang item to dry
Do not dry clean